What is the impact of advertising engraving machines on speed?

The engraving speed determines the efficiency of the work. Under the premise that the engraving effect meets the requirements, of course, the faster the better, the speed is not simple and directly linked to the F value, but depends on the motor acceleration, the greater the acceleration value can be set. The actual engraving speed can be close to the F value. The starting and ending of the running line is greatly affected by the acceleration. The middle part is the F value. The lower the F value, the better the engraving quality. The higher the acceleration value, the more accurate the transition segment. The strength is enough, the stepper motor and the drive are enough.

How to deal with the increase speed of advertising engraving machine?

1. Open <System Parameters> with manual speed and automatic parameters, you can set the appropriate speed yourself.

2. Use the default speed to check one phase, which can increase the processing speed and save time.

3. Use the default speed without tick.

4, speed adaptive optimization, tick. The system is automatically optimized according to the processing path.

5, IJK increased touch, tick.

6, using Z down knife speed, this must be set, it also changes frequently, can be set very slowly or can be set very quickly, free to set.

7. Optimize the Z-direction lifting speed. You can set the knife speed to the idle speed, which means that the knife is slower and slower. Tick. You can also use the z-speed instead of setting it up.

8, empty command, tick.

9. When the pause or end is completed, the spindle is automatically stopped. The reason for this is that your spindle is controlled by the system and you have to tick. It’s not a matter of not checking.

10. The most important thing behind this parameter table is the Z-axis inversion. Must be ticked.

How to deal with the increase in the speed of the advertising engraving machine, we said that the advertising engraving machine and woodworking engraving machine choose which is better?

If a suitable screw is used and a high-power servo motor is used, the speed of the screw drive is not slow, and the overall strength and precision can be adjusted.

Accurately speaking, the rack-driven machine is suitable for long-distance movement. For machines with more than 2.4 meters in the country, the racks are used. There are several objective factors that limit the use of the lead screw. For example, the long-distance screw needs to be at the key point. Use the triggered automatic support bracket to overcome the gravity deformation of the dangling. In foreign countries, especially the design of CNC engraving machine for many Japanese and Taiwanese systems, the fixed screw type is adopted, that is, the rotation of the nut is used to drive the sliding. In addition, at present, more than 2.4 meters in China are used for advertising and woodworking. Therefore, the accuracy level requirements have also been reduced a lot, so the domestic racks are in short supply.

If the customer only uses it for advertising engraving, it is sufficient to use a screw engraving machine within the engraving range of 2.4. Such a format for the precision processing of the badge is no problem.

If you have more pvc boards or other materials on hand, it is a good choice to start a 2500mm woodworking engraving machine. The speed is also good. Rack machining accuracy and rack cutting speed and speed are not much related. According to the size of the motor, the dynamic rate of the servo motor should be reasonable and the actual gantry can be achieved.

According to the above characteristics, it is easy to choose whether it is a woodworking machine engraving machine or an advertising engraving machine.