Talking about: FAG Cross Roller Bearing Scope

FAG cross-roller bearings can withstand loads from all directions (such as axial, thrust or momentum loads). Since the FAG is in contact with the surface of the track, the bearing is less likely to be elastically deformed by the load.

This type of FAG imported bearings are widely used in industrial robots, work machines and medical facilities. FAG requires high rigidity, tightness and high speed to ensure accurate conditions in cross-roller bearings, because cylindrical rollers are in The 90-degree V-groove rolling surface FAG bearings are arranged perpendicular to each other by spacers, so that one cross-roller bearing can withstand loads in all directions such as radial load, axial load and moment load.

The size of the inner and outer rings is minimized, and the extremely thin type is a small size close to the limit and has high rigidity, so it is most suitable for the joint or the rotating part of an industrial robot.

For more information and purchase please visit: https://www.supplyforever.com

Method of disassembling a bearing cap of an electric motor

1. The bearing cover is very easy to remove. Just remove the screws that fix the bearing cover and remove the front and rear bearing covers. The front and rear bearing covers should be marked with a mark to avoid mis-assembly before and after assembly.

2. The assembly method of the bearing cover is: insert the outer cover through the rotating shaft outside the end cover, insert a screw, hold the screw with one hand, turn the shaft with one hand, and then turn the bearing inner cover to the outer cover. When the screw holes are aligned, the screws can be inserted into the screw holes of the inner cover and tightened. Finally, the other two screws are also tightened.

For more information and purchase please visit: https://www.supplyforever.com