How to do the rust of the woodworking machine spindle motor?

The rust of the woodworking engraving machine spindle is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is easy to rust, and slight rust does not affect the normal use of the spindle motor, but if it is not handled for a long time, the life of the spindle motor will be shortened. Woodworking engraving machine spindle motor rust removal method:
First, by hand knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate the appearance of scale, scale, etc., this is the painter radical derusting method, you can also use a blade, scraper, pointed hammer, wire brush , abrasive cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine. Maintenance personnel need to be very careful when removing rust. It is easy to cause the machine spindle to deviate from the track without paying attention.
Second, use a clean lubricant, evenly sprayed on the motor, about half an hour you can use a cotton cloth to wipe off the rust on the stone engraving machine, if the rust is severe, you can spray a few times more lubricant. Lubricating cleaners are non-conductive and have good lubrication.

Tombstone engraving machine maintenance

Tombstone: After the death of a person, if you want to set up a tomb, most of them must have a tombstone. The name of the deceased, the trade, the achievements, the date of death, the name of the person who made the monument, and the relationship with the deceased are generally engraved on the tombstone. Write inscriptions to pay tribute and affection to the deceased. A living person, with words, with love, with tears, with blood, with love written down. It condenses a long road of life and shows an infinite world. Therefore, the materials used are usually natural stone or artificial stone, and marble granite is the preferred material.
At this time, the tombstone engraving machine came in handy. The following is a small series for everyone to explain the maintenance of the tombstone engraving machine:

1. Before operating the machine, first carry out the maintenance of the whole machine, including filling the lubricating oil and wiping the dust and dirt of the whole machine. The machine has a good working environment.

2. Before the machine works, check whether the lines are in good condition and the ground wire is connected to avoid leakage.

3. Regularly check the looseness of each part of the machine to keep the whole machine clean.

4. The cooling water should be clean and sufficient to avoid affecting the circulation of water.

5. The tombstone engraving machine belongs to the electromechanical integration equipment. The ambient humidity and temperature should not be too high and should be within the allowable range.

6, the machine should be powered off in time, do not power on the air for a long time.

The reason why the tombstone engraving machine should be maintained is that the efficiency and quality of the engraving can be improved, the second is to ensure the safety of the operation, and the third is to extend the service life of the engraving machine and reduce the cost of purchasing new machines. Maintenance precautions are helpful to everyone.