Tombstone engraving machine maintenance

Tombstone: After the death of a person, if you want to set up a tomb, most of them must have a tombstone. The name of the deceased, the trade, the achievements, the date of death, the name of the person who made the monument, and the relationship with the deceased are generally engraved on the tombstone. Write inscriptions to pay tribute and affection to the deceased. A living person, with words, with love, with tears, with blood, with love written down. It condenses a long road of life and shows an infinite world. Therefore, the materials used are usually natural stone or artificial stone, and marble granite is the preferred material.
At this time, the tombstone engraving machine came in handy. The following is a small series for everyone to explain the maintenance of the tombstone engraving machine:

1. Before operating the machine, first carry out the maintenance of the whole machine, including filling the lubricating oil and wiping the dust and dirt of the whole machine. The machine has a good working environment.

2. Before the machine works, check whether the lines are in good condition and the ground wire is connected to avoid leakage.

3. Regularly check the looseness of each part of the machine to keep the whole machine clean.

4. The cooling water should be clean and sufficient to avoid affecting the circulation of water.

5. The tombstone engraving machine belongs to the electromechanical integration equipment. The ambient humidity and temperature should not be too high and should be within the allowable range.

6, the machine should be powered off in time, do not power on the air for a long time.

The reason why the tombstone engraving machine should be maintained is that the efficiency and quality of the engraving can be improved, the second is to ensure the safety of the operation, and the third is to extend the service life of the engraving machine and reduce the cost of purchasing new machines. Maintenance precautions are helpful to everyone.

How to do the engraving speed of the cabinet door wood engraving machine

Cabinet door woodworking engraving machine is one of the mechanical production equipment commonly used by furniture manufacturers. However, many staff working on cabinet door wood engraving machine often find that the door engraving machine often appears engraving speed after using for a period of time. The problem of slow time can not find the reason. Today, Xiaobian will answer the reason why the engraving speed of the cabinet door wood engraving machine is fast and slow. Next, follow the CNC network Xiaobian to learn about the related content of the cabinet door woodworking engraving machine instability speed!
There are two reasons why cabinet door woodworking machines appear fast and slow:
A, because of the motherboard firmware firmware design flaws, did not arrange real-time thread to the movement of the servo engraving machine, so when the cabinet door woodworking engraving machine works fast and slow, because the CPU of the cabinet door wood engraving machine motherboard is relatively idle At that time, the cabinet door woodworking engraving machine went faster, and when the CPU of the cabinet door wood engraving machine main board was busy, the CPU did not have time to control the movement of the cabinet door wood engraving machine, and then it went slower.
B. Because the motion control command system used in the cabinet door woodworking engraving machine is not refined, the CPU interpretation speed on the motherboard of the cabinet door wood engraving machine cannot keep up with the movement speed. When the cabinet door woodworking engraving machine has finished a certain step, how to go next, the CPU on the motherboard of the cabinet door wood engraving machine has not explained the movement instruction, and the cabinet door wood engraving machine can only wait for the CPU to interpret the movement instruction. There are many such situations, and the phenomenon that is manifested is that the cabinet door wood carving is slow for a while. It is easier to appear when the graphics of the cabinet door woodworking are more complicated, because the more complicated the graphics, the larger the data and the more fragmented, the heavier the interpretation task.
Whatever the reason, it is the design flaw of the cabinet door wood engraving machine motherboard, unless the designer fundamentally solves it, it can not be solved.
So how do you detect the problem of woodworking engraving in your cabinet door?
It's very simple, you can test it by carving a dense but fragmented figure. Some cabinet door wood engraving machines sometimes have a fast and slow problem, because sometimes there is a dense and fragmented area in the engraved figure. When the cabinet door wood engraving machine is carved into this area, the engraving machine is on the main board. The CPU is too busy! When engraving occurs quickly and slowly, this engraving is scrapped, because the time is slow and slow, not only causes the engraving to be different, but the strokes are blown, which can cause misplacement.