Pay attention to the following points when operating the stone engraving machine

     1. Stone engraving machine has a continuous working time of less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The mahogany furniture engraving machine must not make the water-cooled spindle motor appear water shortage, and replace the cooling water on time to prevent the water temperature from being too high. As much as possible, you can exchange large-capacity water tanks.


     2, stone engraving machine every time the machine is used, it is necessary to pay attention to clean up, be sure to clean the way and the dust on the transmission system, punctual (weekly) lubrication of the transmission system (X.Y.Z three-axis).


     3. If the stone engraving machine is not used for a long time, it should be punctual (weekly) refueling and emptying the cylindrical engraving machine to ensure the flexibility of the transmission system.


     4, stone engraving machine punctuality (according to the use of conditions) to clean the dust inside the electrical box, check the terminal screw is loose, to ensure safe and reliable use of the circuit.


     5, stone engraving machine punctuality (according to the use of conditions) check whether the machine parts of the screw is loose.

Introduction to the operation method of stone engraving machine

With the advancement of science and technology, the appearance of stone engraving machine has gradually replaced the traditional hand-carving. In order to facilitate the use of everyone, Xiaobian will briefly introduce the operation method of stone engraving machine.
Stone engraving machine


First, the stone engraving machine before the boot we need to check whether the machine is connected to the computer, open the machine power and computer power, start the program, enter the operating system.


Second, in the control system, select the mechanical origin menu to correct the origin coordinates of the machine.


Third, load the required processing program, select to open the menu, the standard file operation dialog box will pop up, you can select the drive, path and file name where you want to open the file. After clicking the open button, the machining program will load the system.


4. Determine the origin of the workpiece, manually move the X and Y axes of the stone engraving machine to the predetermined position on the workpiece, select the current point as the workpiece origin menu, or clear the coordinate value of the current position in the coordinate window. So, when the machining program is executed, the current position is used as the starting point for processing.


I hope that the above simple steps, everyone pay more attention to the future operation, in order to better use the stone engraving machine. My company's main stone engraving machine and other equipment, our product quality assurance. Looking forward to your cooperation, dedication Your service.