Introduce several common maintenance methods after FAG universal joint bearing damage

Usually, our FAG universal joint bearing will be seriously damaged after using it for a period of time. In this case, what should we do? We should find some common methods for daily maintenance of FAG universal joint bearings. We will introduce them today. Several so that everyone can use it later. One-third of the bearing damage is caused by fatigue damage, the other third is due to poor lubrication, and the other third is due to contaminants entering the bearing or improperly installed.

In this case, we have especially experimented with FAG universal joint bearings with increasing temperature. When inspecting FAG universal joint bearings that have been removed during regular maintenance and operation of bearing equipment and replacement of peripheral parts, it is necessary to judge sequentially. Whether secondary bearing parts can be reused and recorded better than bad. Most FAG universal joint bearings are damaged for many reasons, such as excessively small bearing clearances due to previously estimated loads, ineffective seals, and tight fits. Any of these factors have their particular type of damage and leave a special mark of damage.https://www.supplyforever.com/

Operation method for correct and effective adjustment of TIMKEN outer spherical bearing noise

TIMKEN bearings are precision parts and require a very cautious attitude when used. That is, the use of high-performance bearings can not achieve the expected performance if not used properly, and it is easy to damage the outer spherical bearings. Most of the bearings are damaged for many reasons - beyond the original estimated load, non-effective seals, too tight bearing clearance caused by too small bearing clearance. Any of these factors have their particular type of damage and leave a special mark of damage.

Therefore, inspection of damaged bearings can be found in most cases. In general, one-third of TIMKEN bearing damage is caused by fatigue damage, and the other third is due to poor lubrication. The other third is due to contaminants entering the outer spherical bearing or improperly installed.

Therefore, what we want to talk about is how to protect it and extend its service life. Who is unwilling to make the bearing wear-resistant and durable? Unless your nerves have problems (hehe), you should pay attention to the following matters when using bearings:

If the bearing is used improperly during operation, it will cause a series of problems, so we should pay attention to these problems in order to find the problem and solve the problem in time to ensure the normal use of the bearing. Under normal circumstances, the outer spherical bearing should pay attention to the following three major matters during operation.

First, check the condition of the running machine and monitor it to avoid equipment downtime.

Second, if the TIMKEN bearing is insufficiently lubricated or excessively lubricated, the lubricant contains a magazine, the load is too large, the outer spherical bearing is damaged, the gap is insufficient, and the high temperature friction generated by the oil seal is the same.

High temperatures often indicate that the bearing is in an abnormal condition. High temperatures are also detrimental to the lubricant in the bearing. Sometimes bearing overheating can be attributed to the bearing's lubricant. If the bearing is operated for longer than 125 degrees Celsius, it will reduce bearing life.

https://www.supplyforever.com/